Luminous Hybrid TX 3.75 kVA Solar PCU | 48V Mppt Off-Grid cum On-Grid Inverter

Rs. 49,950.00 Rs. 78,000.00 -36% OFF

Luminous Hybrid TX 3.75 kVA Solar PCU | 48V Mppt Off-Grid cum On-Grid Inverter

Rs. 49,950.00 Rs. 78,000.00 -36% OFF

Expected Delivery Time 3 and 5.

0 watching this item.
Product description

Luminous Hybrid Inverter range is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid. It is available in 3.75VA


  • Rated AC power - 230V (single phase)
  • Max Supported Panel Power - 3000 Wp, Input Voltage Range (Vmp) – 65V-130V
  • Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V
  • Nominal Battery Bank Voltage - 48V (4 x 12V Batteries)
  • BIS certified solar inverter
  • In-built TDR for loads with heavy in-rush current
  • Inbuilt MPPT charge controller to maximize solar generation from solar panels
  • Inbuilt isolation transformer to protect from grid surges and noise
  • User selectable source priority: Choose source priority from solar, battery and grid
  • User friendly Informative LCD Display
  • MCB protection against short circuit protection
  • Pure sine wave output for better performance & safety of connected loads
  • Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.

Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization

Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency.

User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters.

Guaranteed Safety: Comprehensive protection features include  short circuit, reverse polarity, surge protection etc.

BIS Certified: BIS certified as per IS/IEC standards


 Model Name HYBRID TX 3.7kVA
Capacity (kW) 3kW
Nominal Battery Voltage (Vdc)  48V (4x 12V Batteries)
Output Waveform Sinewave
Type of Charger MPPT
Maximum PV Power (kW) 3000W
Solar Input Voltage (Voc) 65V-165V
Solar Input Voltage Range (Vmp) 65V-130V
Max. PV Input Current (Imp) 46A
Max. MPPT Output Current (A) 60A
Max. Conversion Efficiency 93%
No. of MPPT Channels 1
Input Supply Phases Single Phase
Input Voltage Mains mode (Regulated UPS Mode) 180-260Vac
Nominal Grid Current (Import) 21A
Grid Current (Export) 12A ± 2A
No. of Batteries 4 (12X4 = 48v)
Charging Stages Boost, Absorption, Float
Switching Element
32 Bit DSP Controlled
Nominal Output Voltage (V) & Voltage Range 230V ± 2%
Output Supply Phase Single Phase ( 1 Phase 2 Wire)
Nominal Output Frequency 50 Hz
Nominal Output Current 13A
Output Voltage Distortion (THD) <= 4%
Power Factor 0.9 lag to 0.9 lead
Overload at Nominal output voltage 110% for 10mins, 125% for 1mins, 200% for 5 seconds
Transfer Time ,20 mS
Protection Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array
& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surge
protection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection
Display Parameters "Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time "
Indications Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, System
on Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator
(For Overload, Low Battery, Over Temperature)
Settings "Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),
Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings"
IP Protection Level  IP-21
Operating Temperature 0-45 °C
Storage Temperature 0-45 °C
Cooling Forced Air Cooling
Max. Relative Humidity @ 25 °C Up to 95% (non-condensing)
DC Connection MC4 Connectors
Datalogger & Communication 4 pins RS485 connector
Display / Indications LCD Display (20*4) / LED Indications
Mounting Surface Mount
Galvanic Isolation Inbuilt Isolation Transformer
Dimensions (WxDxH in mm) 300x504x515mm
Net Weight 50kG


Contents: 1 x Luminous Hybrid TX 3.75kVA (MPPT Solar PCU)

Frequently Asked Questions-


Within 24 Hrs


All Over INDIA


Save More Money


Get Expert Advice