Brand: LuminousFeatures: Luminous Red Charge Battery - Red Charge Inverter range of tall tubular UPS batteries use Tubular Technology and have deep cycle design Tubular 150ah Battery - Battery - Battery - RC 18000 150 Ah capacity, 12V Luminous RC18000 Inverter - Luminous Red Charge Ups Tubular plate Technology. These UPS batteries recharge very fast and are suitable for areas that suffer from frequent and long power cuts Tall Tubular Battery -These batteries are designed with thicker positive plates and 20% more electrolyte to withstand power outage. Puncture-resistant polyethylene separator which minimize the possibility of internal short circuits Luminous Tubular Battery - Extremely high purity, corrosion-resistant proprietary spine alloy composition ensures longer battery service life Details: Red Charge Tubular 150ah Battery RC18000 Tall Tubular Battery for home, office Features Extremely high purity, corrosion-resistant proprietary spine alloy composition ensures longer battery service life Tubular plate construction ensures uniform distribution of positive active material for extremely long life Low antimony alloy used-very low maintenance Excellent overcharge tolerance (accepts very deep discharge-suitable for long power cut areas)Tubular Battery UPSRC18000 Battery range of short tubular UPS batteries use Tubular Technology and have deep cycle design. These UPS batteries recharge very fast and are suitable for areas that suffer from frequent and long power cuts. These batteries are designed with thicker positive plates and 20% more electrolyte to withstand power outage. Specifications Product range: Red Charge Capacity: 150 Ah Technology: Tubular Warranty (in months)* - Inclusive of Prorata: 18months + 18months* Nominal Voltage: 12V Supported UPS (VA rating): 600 VA - 10KVA Dry weight (5% Kg): 28.5 Filled weight (5% Kg): 53.3 Dimensions: Length (3 mm)-502 Width (3 mm)-191 Height upto terminal (3 mm)-412 Height upto float top (3 mm)-440 Backup Time (in hrs and min): 3.

Brand: LuminousColor: MulticolorFeatures: Package contains : Pack of 1, 325 Watt/24V Poly Crystalline Solar Panel Advanced EVA encapsulation, High strength Aluminium frame design, Compliance to IEC standards PID resistance Technology for safety against substantial power loss Excellent Low Light performance, Anti-reflective coating, high torsion resistance against winds and snow loads Dimension: 1976x991x40 (mm), 25 years performance warranty Details: Luminous solar panel 325 watt - 24 volt is used to generate electricity from solar panels. It is connected with inverters for generated electricity to make use in homes and offices.Package Dimensions: 15.0 x 9.8 x 5.9 inches

Brand: Luminous Rated AC power - 230V, 26A, Single phase Max Supported Panel Power - 6000 Wp, Input Voltage Range (Vmp) - 120-210V Charge Controller - MPPT, Input Voltage 160-240 Voc Nominal Battery Bank Voltage - 96V Intelligent system with 32 bit DSP Controller which enables it to handle multiple algorithms efficiently Inbuilt MPPT charge controller extracts upto 30% more power from Panels Inbuilt isolation transformer to protect from grid surges and noise Selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display for time charging, Supply etc Dual MCB protection against short circuit protection for AC and DC Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery over-charge and battery deep-discharge. Pure sine wave output for safety and noiseless operation of connected appliances. Compliance to most of the National & International standards for safety and efficiency and reliability, such as IEC - 61683, IEC - 60068 - 1,2,14,30, IEC - 60529 Product Description:NXT+ range of PCUs is the ideal solution for off-grid applications. Designed to offer control, the PCU intelligently optimizes battery charging and power to load among Solar, Battery and Grid power. MPPT Charge ControllerOur solar PCU has latest MPPT‚ (Maximum Power Point Tracking) charge controller. It enables you to extract maximum from solar power. It is 30% more efficient than a normal PWM based PCUs. Priority SettingBeing a bi - directional PCU it allows customers flexibility to set the priority setting based on their requirement of maximum energy saving, power backup only during power cut and power backup through battery in areas where grid supply is not available. Super Informative User friendly LCDA user friendly LCD that displays important information like battery time of charge & discharge, Grid Off / available, Priority setting etc. Safe for your homeLuminous Solar PCU is armed with comprehensive protection features such as short-circuit, reverse polarity, battery over-charge and battery deep-discharge. Its pure sine wave output ensures safety and noiseless operation of connected appliances. MNRE & IEC complianceSolar PCU complies with all the National & International standards for safety and efficiency and reliability, such as IEC - 61683, IEC - 60068 - 1,2,14,30, IEC - 60529 Features: Material: Metal, Color: Multicolor MPPT charge controller to extract upto 30% more power from Panels Inbuilt isolation transformer to protect from grid surges and noise Charging from both mains and solar Selectable source priority: Choose source priority from solar, battery and grid Compliance to IEC standards for safety, reliability and quality Technical Specifications:  Model  NXT+ 7.5 kVA Range Name (Solar) PCU VA Rating 7.5 kVA Output Waveform Sine Wave Warranty 24 months Net weight (kg.) 76.3 kg No. of 12V Batteries in Series 8 Dimensions (L*B*H) 35.0*63.5*58.9 CM Technology (Solar) With Battery Maximum Power Voltage Vmp (V) 120V-210V Max. supported panel power (Wp) 6000 Wp Nominal battery bank voltage 96 V Input Voltage Range (Voc) 160V-240V Manufactured By Luminous Power Technologies Pvt. Ltd Contents of Pack 1 N Inverter, 1 N Manual In-Built Solar Charge Controller MPPT   Contents: 1x Luminous NXT 7.5 kVA

The WiFi stick is a low cost optional extra which allows the user to monitor the performance of solar PV system. The WiFi stick is compatible with all Off-Grid Luminous Solar Inverters (not compatible with on-grid inverters/icruze). It simply plugs into the inverter and any smart device (Apple or Android smartphone/tablet) can be used to complete the installation, providing a WiFi network is within range of the inverter.Once set up the user can monitor the performance of their solar PV system remotely from any smart device. A WiFi and monitoring app (LUMINOUS CONNECT) can be downloaded. The user friendly monitoring dashboard also allows installers to login and view the performance of all their Solar inverter installations.   About This Product Max. Inverters: 1 Protection class: IP65 Data storage: 8MBYTE FLASH Data collection intervals: 5 minutes Compatible with Luminous: Hybrid & Off-Grid Solar PCU Inverters only Weight: 200gm This Product is not covered under "return policy" due to reason "once its get connected with Inverter" it links with that device only. Re-linking requires reset and for that warranty will be tempered 

The GPRS stick is a low cost optional extra which allows the user to monitor the performance of solar PV system. The GPRS stick is compatible with all Luminous Grid Tie Inverters. It simply plugs into the inverter and any smart device (smartphone/tablet/computer) can be used to complete the installation.Once set up the user can monitor the performance of their solar PV system remotely from any smart device. Luminous remote monitoring app can be downloaded. The user friendly monitoring website also allows installers to login and view the performance of all their Solar inverter installations.   About This Product Warranty: 1 Year Max. Inverters: 1 Protection class: IP65 Data storage: 8MBYTE FLASH Data collection intervals: 5 minutes (adjustable: 1-20 minutes) Compatible with Luminous Grid Tie Solar Inverters (On-Grid) Weight: 200gm Requires 2G enabled sim card (not included)

Luminous Hybrid Inverter range is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid. It is available in 3.75VA Features: Rated AC power - 230V (single phase) Max Supported Panel Power - 3000 Wp, Input Voltage Range (Vmp) – 65V-130V Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V Nominal Battery Bank Voltage - 48V (4 x 12V Batteries) BIS certified solar inverter In-built TDR for loads with heavy in-rush current Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc. Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency. User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters. Guaranteed Safety: Comprehensive protection features include  short circuit, reverse polarity, surge protection etc. BIS Certified: BIS certified as per IS/IEC standards Specifications:  Model Name HYBRID TX 3.7kVA Capacity (kW) 3kW Nominal Battery Voltage (Vdc)  48V (4x 12V Batteries) Output Waveform Sinewave SOLAR PHOTOVOLTAIC INPUT Type of Charger MPPT Maximum PV Power (kW) 3000W Solar Input Voltage (Voc) 65V-165V Solar Input Voltage Range (Vmp) 65V-130V Max. PV Input Current (Imp) 46A Max. MPPT Output Current (A) 60A Max. Conversion Efficiency 93% No. of MPPT Channels 1 GRID INPUT Input Supply Phases Single Phase Input Voltage Mains mode (Regulated UPS Mode) 180-260Vac Nominal Grid Current (Import) 21A GRID OUTPUT Grid Current (Export) 12A ± 2A BATTERY No. of Batteries 4 (12X4 = 48v) Charging Stages Boost, Absorption, Float INVERTER Switching Element MOSFET Control 32 Bit DSP Controlled Nominal Output Voltage (V) & Voltage Range 230V ± 2% Output Supply Phase Single Phase ( 1 Phase 2 Wire) Nominal Output Frequency 50 Hz Nominal Output Current 13A Output Voltage Distortion (THD) <= 4% Power Factor 0.9 lag to 0.9 lead Overload at Nominal output voltage 110% for 10mins, 125% for 1mins, 200% for 5 seconds SYSTEM DATA Transfer Time ,20 mS Protection Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surgeprotection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection Display Parameters "Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time " Indications Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, Systemon Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator(For Overload, Low Battery, Over Temperature) Settings "Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings" ENVIRONMENT IP Protection Level  IP-21 Operating Temperature 0-45 °C Storage Temperature 0-45 °C Cooling Forced Air Cooling Max. Relative Humidity @ 25 °C Up to 95% (non-condensing) INTERFACE DC Connection MC4 Connectors Datalogger & Communication 4 pins RS485 connector GENERAL Display / Indications LCD Display (20*4) / LED Indications Mounting Surface Mount Galvanic Isolation Inbuilt Isolation Transformer Dimensions (WxDxH in mm) 300x504x515mm Net Weight 50kG   Contents: 1 x Luminous Hybrid TX 3.75kVA (MPPT Solar PCU) 1 x Luminous Remote Data Monitoring Device (Monitoring via Luminous Connect App)

Luminous Hybrid Inverter range is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid. It is available in 5VA Features: Rated AC power - 230V (single phase) Max Supported Panel Power - 4000 Wp, Input Voltage Range (Vmp) – 65V-130V Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V Nominal Battery Bank Voltage - 48V (4 x 12V Batteries) BIS certified solar inverter In-built TDR for loads with heavy in-rush current Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc. Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency. User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters. Guaranteed Safety: Comprehensive protection features include  short circuit, reverse polarity, surge protection etc. BIS Certified: BIS certified as per IS/IEC standards Specifications:  Model Name HYBRID TX 5kVA Capacity (kW) 4kW Nominal Battery Voltage (Vdc)  48V (4x 12V Batteries) Output Waveform Sinewave SOLAR PHOTOVOLTAIC INPUT Type of Charger MPPT Maximum PV Power (kW) 4000W Solar Input Voltage (Voc) 65V-165V Solar Input Voltage Range (Vmp) 65V-130V Max. PV Input Current (Imp) 61A Max. MPPT Output Current (A) 80A Max. Conversion Efficiency 93% No. of MPPT Channels 1 GRID INPUT Input Supply Phases Single Phase Input Voltage Mains mode (Regulated UPS Mode) 180-270Vac Nominal Grid Current (Import) 29A GRID OUTPUT Grid Current (Export) 16A ± 2A BATTERY No. of Batteries 4 (12X4 = 48v) Charging Stages Boost, Absorption, Float INVERTER Switching Element MOSFET Control 32 Bit DSP Controlled Nominal Output Voltage (V) & Voltage Range 230V ± 2% Output Supply Phase Single Phase ( 1 Phase 2 Wire) Nominal Output Frequency 50 Hz Nominal Output Current 17A Output Voltage Distortion (THD) <= 4% Power Factor 0.9 lag to 0.9 lead Overload at Nominal output voltage 110% for 10mins, 125% for 1mins, 200% for 5 seconds SYSTEM DATA Transfer Time ,20 mS Protection Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surgeprotection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection Display Parameters "Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time " Indications Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, Systemon Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator(For Overload, Low Battery, Over Temperature) Settings "Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings" ENVIRONMENT IP Protection Level  IP-21 Operating Temperature 0-45 °C Storage Temperature 0-45 °C Cooling Forced Air Cooling Max. Relative Humidity @ 25 °C Up to 95% (non-condensing) INTERFACE DC Connection MC4 Connectors Datalogger & Communication 4 pins RS485 connector GENERAL Display / Indications LCD Display (20*4) / LED Indications Mounting Surface Mount Galvanic Isolation Inbuilt Isolation Transformer Dimensions (WxDxH in mm) 350x635x589mm Net Weight 64kG   Contents: 1 x Luminous Hybrid TX 5kVA (MPPT Solar PCU)

Luminous Hybrid Inverter range is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid. It is available in 5VA Features: Rated AC power - 230V (single phase) Max Supported Panel Power - 4000 Wp, Input Voltage Range (Vmp) – 65V-130V Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V Nominal Battery Bank Voltage - 48V (4 x 12V Batteries) BIS certified solar inverter In-built TDR for loads with heavy in-rush current Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc. Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency. User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters. Guaranteed Safety: Comprehensive protection features include  short circuit, reverse polarity, surge protection etc. BIS Certified: BIS certified as per IS/IEC standards Specifications:  Model Name HYBRID TX 5kVA Capacity (kW) 4kW Nominal Battery Voltage (Vdc)  48V (4x 12V Batteries) Output Waveform Sinewave SOLAR PHOTOVOLTAIC INPUT Type of Charger MPPT Maximum PV Power (kW) 4000W Solar Input Voltage (Voc) 65V-165V Solar Input Voltage Range (Vmp) 65V-130V Max. PV Input Current (Imp) 61A Max. MPPT Output Current (A) 80A Max. Conversion Efficiency 93% No. of MPPT Channels 1 GRID INPUT Input Supply Phases Single Phase Input Voltage Mains mode (Regulated UPS Mode) 180-270Vac Nominal Grid Current (Import) 29A GRID OUTPUT Grid Current (Export) 16A ± 2A BATTERY No. of Batteries 4 (12X4 = 48v) Charging Stages Boost, Absorption, Float INVERTER Switching Element MOSFET Control 32 Bit DSP Controlled Nominal Output Voltage (V) & Voltage Range 230V ± 2% Output Supply Phase Single Phase ( 1 Phase 2 Wire) Nominal Output Frequency 50 Hz Nominal Output Current 17A Output Voltage Distortion (THD) <= 4% Power Factor 0.9 lag to 0.9 lead Overload at Nominal output voltage 110% for 10mins, 125% for 1mins, 200% for 5 seconds SYSTEM DATA Transfer Time ,20 mS Protection Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surgeprotection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection Display Parameters "Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time " Indications Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, Systemon Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator(For Overload, Low Battery, Over Temperature) Settings "Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings" ENVIRONMENT IP Protection Level  IP-21 Operating Temperature 0-45 °C Storage Temperature 0-45 °C Cooling Forced Air Cooling Max. Relative Humidity @ 25 °C Up to 95% (non-condensing) INTERFACE DC Connection MC4 Connectors Datalogger & Communication 4 pins RS485 connector GENERAL Display / Indications LCD Display (20*4) / LED Indications Mounting Surface Mount Galvanic Isolation Inbuilt Isolation Transformer Dimensions (WxDxH in mm) 350x635x589mm Net Weight 64kG   Contents: 1 x Luminous Hybrid TX 5kVA (MPPT Solar PCU) 1 x Luminous Remote Data Monitoring Device (Monitoring via Luminous Connect App)

Luminous Hybrid Inverter Combo is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid. Solar Power Generation Combo includes: Quantity   Warranty Hybrid Solar PCU TX 3.75VA (with Wifi remote monitoring dongle) 1 2 Years 80Ah c10 Solar Tall Tubular Batteries 4 60* Months 445Watts mono perc half-cut solar panels 4 12/25 Years Hybrid PCU Features: Rated AC power - 230V (single phase) Max Supported Panel Power - 3000 Wp, Input Voltage Range (Vmp) – 65V-130V Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V Nominal Battery Bank Voltage - 48V (4 x 12V Batteries) BIS certified solar inverter In-built TDR for loads with heavy in-rush current Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc. Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency. User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters. Guaranteed Safety: Comprehensive protection features include  short circuit, reverse polarity, surge protection etc. BIS Certified: BIS certified as per IS/IEC standards Specifications:  Model Name HYBRID TX 3.7kVA Capacity (kW) 3kW Nominal Battery Voltage (Vdc)  48V (4x 12V Batteries) Output Waveform Sinewave SOLAR PHOTOVOLTAIC INPUT Type of Charger MPPT Maximum PV Power (kW) 3000W Solar Input Voltage (Voc) 65V-165V Solar Input Voltage Range (Vmp) 65V-130V Max. PV Input Current (Imp) 46A Max. MPPT Output Current (A) 60A Max. Conversion Efficiency 93% No. of MPPT Channels 1 GRID INPUT Input Supply Phases Single Phase Input Voltage Mains mode (Regulated UPS Mode) 180-260Vac Nominal Grid Current (Import) 21A GRID OUTPUT Grid Current (Export) 12A ± 2A BATTERY No. of Batteries 4 (12X4 = 48v) Charging Stages Boost, Absorption, Float INVERTER Switching Element MOSFET Control 32 Bit DSP Controlled Nominal Output Voltage (V) & Voltage Range 230V ± 2% Output Supply Phase Single Phase ( 1 Phase 2 Wire) Nominal Output Frequency 50 Hz Nominal Output Current 13A Output Voltage Distortion (THD) <= 4% Power Factor 0.9 lag to 0.9 lead Overload at Nominal output voltage 110% for 10mins, 125% for 1mins, 200% for 5 seconds SYSTEM DATA Transfer Time ,20 mS Protection Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surgeprotection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection Display Parameters "Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time " Indications Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, Systemon Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator(For Overload, Low Battery, Over Temperature) Settings "Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings" ENVIRONMENT IP Protection Level  IP-21 Operating Temperature 0-45 °C Storage Temperature 0-45 °C Cooling Forced Air Cooling Max. Relative Humidity @ 25 °C Up to 95% (non-condensing) INTERFACE DC Connection MC4 Connectors Datalogger & Communication 4 pins RS485 connector GENERAL Display / Indications LCD Display (20*4) / LED Indications Mounting Surface Mount Galvanic Isolation Inbuilt Isolation Transformer Dimensions (WxDxH in mm) 300x504x515mm Net Weight 50kG   Half-Cut Solar Panel Features: SPECIAL CELL DESIGN: The unique cell design leads to reduced electrodes resistance and smaller current, thus enables higher fill factor. Meanwhile, it can reduce losses of mismatch and cell wear, and increase total reflection. IP68 RATED JUNCTION BOX: IP68 rated junction box ensures an outstanding waterproof level, supports on the cables. Anti-reflective coating and back surface (BSF) for more light absorption. Advanced EVA (ethyl vinyl acetate) encapsulation to give better protection to modules High Power Output: Compared to 158.75mm module, the power output can increase 25W-30W High PID resistant: PID resistance Technology (Potential-Induced Degradation) for safety against substantial power loss due to stray currents triggered by certain climate conditions Excellent weak light performance: Excellent Low light performance in low visibility in clouds, evening, and morning. Lower Operating Temperature: Lower operating temperature and temperature coefficient increases the power output. Extended load tests: Best in Class conversion efficiency Withstanding Harsh Environment: High strength light-weight aluminium frame design for high torsion resistance against winds and snow loads TECHNICAL SPECIFICATIONS ELECTRICAL CHARACTERISTICS OF SPV MODULES Maximum Power at STC (Pmax) 445Wp/24V (-0 to +3%) Open circuit Voltage (Voc) 48.9V Voltage at maximum power (Vmp) 40.9V Short Circuit current (Isc) 11.32A Current at maximum power (Imp) 10.7A Maximum Module Efficiency (%) 20.7% Operating Temperature -40°C to +85°C Maximum System Voltage 1500VDC Maximum Series Fuse Rating 20Amp Solar Cell Mono Perc silicon 166 mm No. of Cells 144 (6 x 24) Dimensions 209.4*103.9*3.5 CM Weight 23.5 kgs Front Glass 3.2 mm tempered glass Frame Anodized aluminum alloy Junction Box IP68 rated (3 bypass diodes) Output Cables 4.0 mm2 Connectors MC4 EV02, Cable 01S   BIS certified as per IS/IEC standards which is mandatory for all solar panels. Battery Features: Tall Tubular plate battery 60 Months warranty Rated Capacity @ C10: 80Ah Factory charged battery in ready to use condition Water level indicators for easy maintenance. Tubular plate construction for long life and superior performance. Highly puncture-resistant polyethylene separator for higher reliability. Warranty 80Ah C10 Battery: 60* Months Contents:  Luminous Hybrid TX 3.7kVA PCU + Remote Monitoring Device x1 Luminous 445 Watts Mono PERC half-cut panels x4 Luminous LPTT1280H 80Ah 12 Volt Solar Tall Tubular Battery x4

Luminous Hybrid Inverter Combo is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid. Solar Power Generation Combo includes: Quantity   Warranty Hybrid Solar PCU TX 3.75VA (with Wifi remote monitoring dongle) 1 2 Years 150Ah c10 Solar Tall Tubular Batteries 4 60* Months 445Watts mono perc half-cut solar panels 4 12/25 Years Hybrid PCU Features: Rated AC power - 230V (single phase) Max Supported Panel Power - 3000 Wp, Input Voltage Range (Vmp) – 65V-130V Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V Nominal Battery Bank Voltage - 48V (4 x 12V Batteries) BIS certified solar inverter In-built TDR for loads with heavy in-rush current Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc. Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency. User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters. Guaranteed Safety: Comprehensive protection features include  short circuit, reverse polarity, surge protection etc. BIS Certified: BIS certified as per IS/IEC standards Specifications:  Model Name HYBRID TX 3.7kVA Capacity (kW) 3kW Nominal Battery Voltage (Vdc)  48V (4x 12V Batteries) Output Waveform Sinewave SOLAR PHOTOVOLTAIC INPUT Type of Charger MPPT Maximum PV Power (kW) 3000W Solar Input Voltage (Voc) 65V-165V Solar Input Voltage Range (Vmp) 65V-130V Max. PV Input Current (Imp) 46A Max. MPPT Output Current (A) 60A Max. Conversion Efficiency 93% No. of MPPT Channels 1 GRID INPUT Input Supply Phases Single Phase Input Voltage Mains mode (Regulated UPS Mode) 180-260Vac Nominal Grid Current (Import) 21A GRID OUTPUT Grid Current (Export) 12A ± 2A BATTERY No. of Batteries 4 (12X4 = 48v) Charging Stages Boost, Absorption, Float INVERTER Switching Element MOSFET Control 32 Bit DSP Controlled Nominal Output Voltage (V) & Voltage Range 230V ± 2% Output Supply Phase Single Phase ( 1 Phase 2 Wire) Nominal Output Frequency 50 Hz Nominal Output Current 13A Output Voltage Distortion (THD) <= 4% Power Factor 0.9 lag to 0.9 lead Overload at Nominal output voltage 110% for 10mins, 125% for 1mins, 200% for 5 seconds SYSTEM DATA Transfer Time ,20 mS Protection Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surgeprotection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection Display Parameters "Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time " Indications Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, Systemon Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator(For Overload, Low Battery, Over Temperature) Settings "Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings" ENVIRONMENT IP Protection Level  IP-21 Operating Temperature 0-45 °C Storage Temperature 0-45 °C Cooling Forced Air Cooling Max. Relative Humidity @ 25 °C Up to 95% (non-condensing) INTERFACE DC Connection MC4 Connectors Datalogger & Communication 4 pins RS485 connector GENERAL Display / Indications LCD Display (20*4) / LED Indications Mounting Surface Mount Galvanic Isolation Inbuilt Isolation Transformer Dimensions (WxDxH in mm) 300x504x515mm Net Weight 50kG   Half-Cut Solar Panel Features: SPECIAL CELL DESIGN: The unique cell design leads to reduced electrodes resistance and smaller current, thus enables higher fill factor. Meanwhile, it can reduce losses of mismatch and cell wear, and increase total reflection. IP68 RATED JUNCTION BOX: IP68 rated junction box ensures an outstanding waterproof level, supports on the cables. Anti-reflective coating and back surface (BSF) for more light absorption. Advanced EVA (ethyl vinyl acetate) encapsulation to give better protection to modules High Power Output: Compared to 158.75mm module, the power output can increase 25W-30W High PID resistant: PID resistance Technology (Potential-Induced Degradation) for safety against substantial power loss due to stray currents triggered by certain climate conditions Excellent weak light performance: Excellent Low light performance in low visibility in clouds, evening, and morning. Lower Operating Temperature: Lower operating temperature and temperature coefficient increases the power output. Extended load tests: Best in Class conversion efficiency Withstanding Harsh Environment: High strength light-weight aluminium frame design for high torsion resistance against winds and snow loads TECHNICAL SPECIFICATIONS ELECTRICAL CHARACTERISTICS OF SPV MODULES Maximum Power at STC (Pmax) 445Wp/24V (-0 to +3%) Open circuit Voltage (Voc) 48.9V Voltage at maximum power (Vmp) 40.9V Short Circuit current (Isc) 11.32A Current at maximum power (Imp) 10.7A Maximum Module Efficiency (%) 20.7% Operating Temperature -40°C to +85°C Maximum System Voltage 1500VDC Maximum Series Fuse Rating 20Amp Solar Cell Mono Perc silicon 166 mm No. of Cells 144 (6 x 24) Dimensions 209.4*103.9*3.5 CM Weight 23.5 kgs Front Glass 3.2 mm tempered glass Frame Anodized aluminum alloy Junction Box IP68 rated (3 bypass diodes) Output Cables 4.0 mm2 Connectors MC4 EV02, Cable 01S   BIS certified as per IS/IEC standards which is mandatory for all solar panels. Battery Features: Tall Tubular plate battery 60 Months warranty Rated Capacity @ C10: 150Ah Factory charged battery in ready to use condition Water level indicators for easy maintenance. Tubular plate construction for long life and superior performance. Highly puncture-resistant polyethylene separator for higher reliability. Warranty 150Ah C10 Battery: 60* Months Contents:  Luminous Hybrid TX 3.7kVA PCU + Remote Monitoring Device x1 Luminous 445 Watts Mono PERC half-cut panels x 4 Luminous LPTT12150L 150Ah 12 Volt Solar Tall Tubular Battery x 4

Luminous Hybrid Inverter range is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid. It is available in 3.75VA Features: Rated AC power - 230V (single phase) Max Supported Panel Power - 3000 Wp, Input Voltage Range (Vmp) – 65V-130V Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V Nominal Battery Bank Voltage - 48V (4 x 12V Batteries) BIS certified solar inverter In-built TDR for loads with heavy in-rush current Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc. Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency. User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters. Guaranteed Safety: Comprehensive protection features include  short circuit, reverse polarity, surge protection etc. BIS Certified: BIS certified as per IS/IEC standards Specifications:  Model Name HYBRID TX 3.7kVA Capacity (kW) 3kW Nominal Battery Voltage (Vdc)  48V (4x 12V Batteries) Output Waveform Sinewave SOLAR PHOTOVOLTAIC INPUT Type of Charger MPPT Maximum PV Power (kW) 3000W Solar Input Voltage (Voc) 65V-165V Solar Input Voltage Range (Vmp) 65V-130V Max. PV Input Current (Imp) 46A Max. MPPT Output Current (A) 60A Max. Conversion Efficiency 93% No. of MPPT Channels 1 GRID INPUT Input Supply Phases Single Phase Input Voltage Mains mode (Regulated UPS Mode) 180-260Vac Nominal Grid Current (Import) 21A GRID OUTPUT Grid Current (Export) 12A ± 2A BATTERY No. of Batteries 4 (12X4 = 48v) Charging Stages Boost, Absorption, Float INVERTER Switching Element MOSFET Control 32 Bit DSP Controlled Nominal Output Voltage (V) & Voltage Range 230V ± 2% Output Supply Phase Single Phase ( 1 Phase 2 Wire) Nominal Output Frequency 50 Hz Nominal Output Current 13A Output Voltage Distortion (THD) <= 4% Power Factor 0.9 lag to 0.9 lead Overload at Nominal output voltage 110% for 10mins, 125% for 1mins, 200% for 5 seconds SYSTEM DATA Transfer Time ,20 mS Protection Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surgeprotection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection Display Parameters "Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time " Indications Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, Systemon Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator(For Overload, Low Battery, Over Temperature) Settings "Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings" ENVIRONMENT IP Protection Level  IP-21 Operating Temperature 0-45 °C Storage Temperature 0-45 °C Cooling Forced Air Cooling Max. Relative Humidity @ 25 °C Up to 95% (non-condensing) INTERFACE DC Connection MC4 Connectors Datalogger & Communication 4 pins RS485 connector GENERAL Display / Indications LCD Display (20*4) / LED Indications Mounting Surface Mount Galvanic Isolation Inbuilt Isolation Transformer Dimensions (WxDxH in mm) 300x504x515mm Net Weight 50kG   Contents: 1 x Luminous Hybrid TX 3.75kVA (MPPT Solar PCU)

Product Description: Pure Sine Wave technology Capacity - 900 VA, Rated Power - 756 W An integrated inverter battery design with an elegant, dedicated battery enclosure providing modern outlook for your house. Battery needs to be purchased externally. Icon supports all Tubular batteries from 150Ah - 220 Ah Next generation revolutionary inverter design for Hassel free battery water top Simplified inverter indications with three large twin colour LED lights representing Normal (Green) and User attention (Red) conditions. Fast Low voltage battery charging starts at 90V with full charging current. No Open wires as battery is encapsulated in the inverter asking it completely safe for children Features: Pure Sine Wave Revolutionary design comprising of dedicated enclosure for battery Hassel free battery water top Completely safe for children Fast Low voltage battery charging starts at 90V Supports Tubular Battery (150AH - 220AH) 24 Months Warranty on electronics" Technical Specifications: VA Rating: 900VA; Peak Load: 756W; Output Voltage: 220V (inverter mode) Inverter Type: Pure sinewave output; Premium design: An integrated inverter battery design with a dedicated battery enclosure. Battery needs to be purchased separately Load Options: 1 TV, 5 LED Bulb, 3 FAN, 4 Tube light, 1 Laptop, Wi-Fi Router; Efficiency: 80-82 percent; Output Voltage: 200-220V AC on UPS Mode; Output Frequency: 50 Hz; Input Voltage: 85-290 V; Input Frequency: 45-55 Hz Fast Charge technology: Fast battery charging in Low voltage starts at 90V with a full charging current Battery Compatibility: Icon supports Tall Tubular batteries from 150Ah - 220 Ah. The battery needs to be purchased separately Battery cabinet dimensions: 500*190*450 with 15 mm clearance on each side; Product dimensions: 76.5 x 50.5 x 24.6 CM LED Indication: User-friendly Simplified inverter indications with three large twin color LED lights representing Normal (Green) and User attention (Red) conditions Protection: Overload, over-temperature, battery deep discharge, short circuitPackage Inclusions: Luminous iCon 1100 pure sine wave inverter, instruction manual, warranty card Specifications: Max Charging Current (in Amperes) 17A Net weight (kg.) 13 Kg (excluding battery) No. of batteries supported 1 Battery (12 Volt) Dimensions 76.5X50.5X24.6 all in CM Warranty 24 Months (For detailed terms and conditions of warranty please refer to the warranty card supplied along with the product) Contents of Pack 1 N Inverter, 1 N Manual

Luminous iCruze is a Super Inverter which can run various high capacity loads like Fridge, Washing Machine, Geyser, Water Pump, Photocopiers etc. It is Super because of its Super Design, Super Connectivity & Super Technology. iCruze is an inverter with unmatchable performance and is ideal for residence, offices and commercial purpose. iCruze 3000 Inverter Features: LCD Display to easily understand status of mains availability, back-up time, battery status, etc Sine Wave Inverter, Output Rating: 2800VA / 24V (Bulb load : 2240W) with 24 Month Warranty by Luminous across India Can run 1HP Water Motor Pump (Tested Brands: Lubi, Havells, Kirloskar, Usha etc) Can run 5 Star inverter AC of 1.2 Ton Capacity  Compact design with improved efficiency and load handling User friendly LCD display and control buttons Smart Inverter with an option of GSM/Wi-Fi connectivity and Android/iOS app Intelligent battery charging algorithm optimizes the charging current according to the battery capacity Easily by-pass the device in case of device fault and allow mains to be available without any wiring changes User friendly LCD Display to easily understand status of mains availability, back-up time, battery status, etc. Technical Specifications Capacity 2.8 kVA No. of batteries required 2 (80 - 220 Ah) Display type LCD    Contents: 1x Luminous iCruze 3000 Inverter & 1x Wifi Dongle (Remote Monitoring)

Luminous Power Technologies has unveiled new Li-ON series inverters with integrated lithium-ion batteries as a compact, safe and efficient power backup solution for the retail and domestic segments. The new plug-and-play inverters provide solid performance with negligible maintenance compared to conventional lead-acid battery-based inverters New Age Powerful Sine wave inverter With in-built Lithium ion battery making the product compact, safe, long lasting and efficient. The Product performance is managed and controlled by Intelligent Battery Management system (BMS) increasing the product performance. Features: Pure Sine wave Technology, Output Rating: 1100VA (Bulb load : 880W) with 60 Months Warranty by Luminous across India Can run 0.5HP Water Motor Pump (Tested Brands: Lubi, Havells, Kirloskar, Usha etc) Compact design with improved efficiency and load handling User friendly LCD display and control buttons User friendly LCD Display to easily understand status of mains availability, back-up time, battery status, etc. 3X longer life When compared to standard Lead acid batteries. Consistent Backup Maintain consistent backup for its entire life 3X Faster Charging Product is ready for the next power cut cycle Maintenance Free No hassle, plug it and forget it. Premium Metallic White Finish Saves Space Compact size, Easy to Transfer, Can take along Easily Intelligent Battery Management System(BMS) To ensure the optimum performance. Advanced Informative LCD Display. No fumes No Acid Spill No water top-up required No Protruding Wires completely safe for children Li-ON 1250, the first in the Li-ON series, features a battery management system (BMS) that manages the performance of both the inverter and the battery, thereby increasing its performance and life. The 1,100VA inverter can run a maximum of 880W of load and is ideal for running up to a three-bedroom house or a large showroom with a backup time of more than three hours at 50% load. An advanced LCD screen displays running statistics like battery charging time and backup time. “The product supports energy efficiency with less power required to charge the lithium-ion battery than the lead-acid battery. In addition, the lithium battery provides a consistent backup over its lifecycle."Space is not a constraint with Li-ON integrated inverterApproximately 60% lesser in size than lead-acid battery-based solutions. Technical Specifications Capacity 1100 VA Active Power 880W Regulated UPS Mode INPUT Rated Voltage 230V AC Under Voltage 180V±5V Under Voltage Restoration 190V±5V Over Voltage 265V±5V Over Voltage Restoration 255V±5V Unregulated Eco Mode INPUT Under Voltage 85V±10V Under Voltage Restoration 105V±10V Over Voltage 290V±10V Over Voltage Restoration 280V±10V OUTPUT Rated Voltage (UPS Mode) 230V ± 10% Voltage (Mains Mode) Same as Input Frequency (UPS Mode) 50 ± 0.5Hz Frequency (Mains Mode) Same as Input 45-55Hz Overload > 10% Transfer Time (typical a.s) < 20ms. BATTERY Battery System (Nominal Voltage) 12.8V DC Battery Capacity 1280Wh (100Ah X 12.8V = 1280Wh) Number on Battery (in-built) 1 Charging Time 3-4Hrs. (typical on standard Mains Voltage) Type of Battery Lithium ION Battery PHYSICAL Net Weight (Kg.) 25.0 approx. Gross Weight (Kg.) 27.2 approx. Dimensions (LxWxH in MM) 300x355x284 BACKUP TIME Standard Load: 1 TV + STB, 2 Fans, 4 LED Bulbs/2 Tube lights - 320 W 3 hrs 40 mins Medium Load: 1 TV + STB, 2 Fans, 1 Laptop + Router, 4 LED Bulbs, 2 Tube lights - 440 W 2 hrs 30 mins High Load: 1 TV + STB, 2 Fans, 1Laptop + Router, 4 LED Bulbs,2 Tube lights, Printer (small)/Refrigerator - 750W 1 hr 30 mins    Contents: 1x Luminous Li-On 1250 Inverter with in-built Lithium Battery

Brand: Luminous Features: Battery Capacity 40 Ah Warranty 36 months Battery Voltage 12 V Dimensions 412x173x267 Weight Dry: 12.1 kg Filled: 21.6 kg Item Code LPT 1240L   Details: Luminous Solar batteries are C10 rating deep cycle batteries specially designed for longer backup time and solar home applications. Solar Batteries are low maintenance batteries and requires low water top up. However you should check water level at least twice in a year.