
EAPRO
EAPRO 3750VA MPPT Solar PCU Inverter 3.75kVA 48V
Rs. 39,950.00
Rs. 49,950.00
Brand: EAPRO
Highlights:
Rated AC power - 3750VA.
Max Supported Panel Power - 3840 Wp, Input Voltage Range (Vmp) - 70V to150V.
Charge Controller – MPPT, Input Voltage V(oc) -188V .
Nominal Battery Bank Voltage – 48V (Supports 4 Batteries).
24 Months Warranty.
Provision for setting of critical parameters as per user requirement like Time, Boost Battery Voltage, Solar Max charging current, Battery Low Cut voltage etc.
Efficient Current Charging at Low Mains in Normal Mode only.
Intelligent Battery Charging and Charge Sharing with Mains/Charging by solar power only.
Dual Charging current option for Normal Charging and High Charging.
High Power new generation MOSFET capable of handling high inrush/surge current.
Intelligent Multicolor LCD display for all system parameters .
Programmed inbuilt cooling fan.
Inbuilt fully regulated charge controller.
Capacity (VA)
3750VA
Nominal battery voltage (Vdc)
48V
Charge Controller Type
MPPT (dual)
Maximum PV Power in input
3840W
Max Efficiency
above 98 %
Number of input channel
Single
Rated Output Power (VA)
3750VA
Max. DC Input Voltage (V)
188 V
MPPT Efficiency
above 98 %
Max Input Strings Number
3 (all strings in parallel)
Dimensions (L*W*H) [IN mm]
441*391*502
Input Voltage Range (Vmp)
150 V
Input Voltage Range (Voc)
188 V
No. of Panels
12 (@320-380 W)
Features:
Eapro 3750 is an MPPT Solar PCU designed to extract maximum power from Solar Panels to save electricity bills
Eapro 3750 is 3.75kVA 48V Model (requires: 4 x 12V Solar Batteries)
Inverter Technology Appliances like AC/Fridge can be easily run, Also Water Pump 1HP of Crompton or Kirloskar are successfully tested
We recommend user to choose high efficient solar panels from our Solar Panels section to get maximum output.
Please note: installation not included and user need to hire an expert engineer or you can contact UrbanUrja team for arrangements of installation which will be charged extra. All the warranties will be given by EAPRO as per their policies.
Multi Channel Interleaved MPPT Technology with Tracking efficiency-99.5%, More efficient and high reliable. Smart Solar Selection for max. utilization of Solar Power.
Intelligent system with DSP Controller which enables it to handle multiple algorithms efficiently. Inbuilt isolation transformer to protect from grid surges and noise.
User friendly multicolor LCD Display for time, charging current, Supply etc. Hybrid charging : Charging from both mains and solar. Intelligent overload sensing circuitry with auto retry facility.

EAPRO
EAPRO 3750VA Solar PCU Inverter 3.75kVA 48V
Rs. 26,950.00
Rs. 39,950.00
Brand: EAPRO
Highlights:
Rated AC power - 3750VA.
Max Supported Panel Power - 3200 Wp.
Charge Controller Rating – 50A/48V, with 98% efficiency for fast charging
24 Months Warranty
Efficient Current Charging at Low Mains in Normal Mode only.
Intelligent Battery Charging and Charge Sharing with Mains/Charging by solar power only.
Dual Charging current option for Normal Charging and High ChargingHigh Power new generation MOSFET capable of handling high inrush/surge current.
Intelligent Multicolour LCD display for all system parameters
Programmed inbuilt cooling fan.
Inbuilt fully regulated charge controller.
Capacity (VA)
3.75KVA
Nominal battery voltage (Vdc)
48V
Charge Controller Type
PWM
Charge Controller Rating
50A/48V
Maximum PV Power
3200Wp
Rated Output Power (kVA)
3.75KVA
Input Voltage Range (Voc)
88V
Input Voltage Range (Vmp)
58V-68V
Battery Boost volatage (Adjustable)
14.4V (Default setting)
Battery Low Cut (Adjustable)
10.6V (Default setting)
Grid charging current(Adjustable)
18A (Default setting)
Solar Charging Current(Adjustable)
40A (Default setting)
Dimensions (L*W*H) [mm]
400*380*465 mm (Net Weight 28.97 Kg)
Supported Battery Types
Flat,Tubular, VRLA(SMF)
Features:
Eapro 3750 is an PWM Solar PCU designed to extract maximum power from Solar Panels to save electricity bills
Eapro 3750 is 3.5kVA 48V Model (requires: 4 x 12V Solar Batteries)
Inverter Technology Appliances like AC/Fridge can be easily run, Also Water Pump 1HP of Crompton or Kirloskar are successfully tested
We recommend user to choose high efficient solar panels from our Solar Panels section to get maximum output.
Please note: installation not included and user need to hire an expert engineer or you can contact UrbanUrja team for arrangements of installation which will be charge extra. All the warranties will be given by EAPRO as per their policies.
Solar Hybrid UPS with inbuilt Real Time Clock for providing the optimum performance of the Solar inverter for Maximum Power Saving.
Pure Sine wave technology using PWM topology with inbuilt Real Time Clock.Smart Solar Selection for maximum utilization of Solar Power.
Provision for setting of critical parameters., like, Time, Boost Battery Voltage, Solar Max charging current, Battery Low Cut voltage etc
Provision for Setting of 4 different Saving Levels according to the User Requirement including, Full Time Charging from the Solar, No Mains Charging etc.
Provision for maintaining the gravity of the battery once in a month.
Intelligent Multicolor LCD display for all system parametersSupports dual mode of working, UPS mode (180V to 260V) and Normal mode(100V to 280V)
Closed Loop Auto Sensing Software Control(ASSC) Smart Battery Charging Technology for longer battery life.
Sine wave output for safety of your sensitive appliances and distortion less operations.
Intelligent overload sensing circuitry with auto retrial facility.


EAPRO
EAPRO 5000VA Dual MPPT Solar PCU Inverter 5kVA 48V
Rs. 54,950.00
Rs. 69,950.00
Brand: EAPRO
Highlights:
Rated AC power - 5000VA.
Max Supported Panel Power - 5000 Wp, Input Voltage Range (Vmp) - 130V to 280V.
Charge Controller – MPPT, Input Voltage (Voc) -350V .
Nominal Battery Bank Voltage – 48V (Supports 4 Batteries).
24 Months Warranty.
Provision for setting of critical parameters as per user requirement like Time, Boost Battery Voltage, Solar Max charging current, Battery Low Cut voltage etc.
Efficient Current Charging at Low Mains in Normal Mode only.
Intelligent Battery Charging and Charge Sharing with Mains/Charging by solar power only.
Dual Charging current option for Normal Charging and High Charging.
High Power new generation MOSFET capable of handling high inrush/surge current.
Intelligent Multicolor LCD display for all system parameters .
Programmed inbuilt cooling fan.
Inbuilt fully regulated charge controller.
Capacity (VA)
5000VA
Nominal battery voltage (Vdc)
48V
Charge Controller Type
MPPT (dual)
Maximum PV Power in input
5000W
Max Efficiency
above 98 %
Number of input channel
Single
Rated Output Power (VA)
5000VA
Max. DC Input Voltage (V)
350 V
MPPT Efficiency
above 98 %
Max Input Strings Number
4 (two string in parallel to every Channel)
Dimensions (L*W*H) [IN mm]
543*394*648
Input Voltage Range (Vmp)
280 V
Input Voltage Range (Voc)
350 V
No. of Panels
14 (@320-380 W)
Features:
Eapro 5000 is an MPPT Solar PCU designed to extract maximum power from Solar Panels to save electricity bills
Eapro 5000 is 5kVA 48V Model (requires: 4 x 12V Solar Batteries)
Inverter Technology Appliances like AC/Fridge can be easily run, Also Water Pump 1.5HP of Crompton or Kirloskar are successfully tested
We recommend user to choose high efficient solar panels from our Solar Panels section to get maximum output.
Please note: installation not included and user need to hire an expert engineer or you can contact UrbanUrja team for arrangements of installation which will be charge extra. All the warranties will be given by EAPRO as per their policies.
Multi Channel Interleaved MPPT Technology with Tracking efficiency-99.5%, More efficient and high reliable. Smart Solar Selection for max. utilization of Solar Power.
Intelligent system with DSP Controller which enables it to handle multiple algorithms efficiently. Inbuilt isolation transformer to protect from grid surges and noise.
User friendly multicolor LCD Display for time, charging current, Supply etc. Hybrid charging : Charging from both mains and solar. Intelligent overload sensing circuitry with auto retry facility.

EAPRO
EAPRO 5500VA Solar PCU Inverter 5.5kVA 48V
Rs. 43,950.00
Rs. 55,950.00
Brand: EAPRO
Highlights:
Rated AC power: 5KVA, 48V
Operating Voltage 100V-280V
Provision for setting of critical parameters as per user requirement, like, Time, Boost Battery Voltage, Solar Max charging current, Battery Low Cut voltage etc
Max supported panel power: 48V upto 4800Wp
Charge Controller Rating – 70A/48V, with 98% efficiency for fast charging
24 Months Warranty
Efficient Current Charging at Low Mains in Normal Mode only.
Intelligent Battery Charging and Charge Sharing with Mains/Charging by solar power only.
Dual Charging current option for Normal Charging and High Charging
High Power new generation MOSFET capable of handling high inrush/surge current.
Intelligent Multicolor LCD display for all system parameters
Programmed inbuilt cooling fan.
Inbuilt fully regulated charge controller.
Capacity (VA)
5.5KVA
Nominal battery voltage (VDC)
48V
Charge Controller Type
PWM
Charge Controller Rating
70A/48V
Maximum PV Power
4800Wp
Rated Output Power (KVA)
5KVA
Input Voltage Range (Voc)
88V/172V
Input Voltage Range (Vmp)
116V-136V
Battery Boost volatage (Adjustable)
14.4V (Default setting)
Battery Low Cut (Adjustable)
10.6V (Default setting)
Grid charging current(Adjustable)
24A/16A (Default setting)
Solar Charging Current(Adjustable)
40A (Default setting)
Dimensions (L*W*H) [mm]
510*370*550 mm (Net Weight 43.79 Kg)
Supported Battery Types
Flat,Tubular, VRLA(SMF)
Features:
Eapro 5K5 is an PWM Solar PCU designed to extract maximum power from Solar Panels to save electricity bills
Eapro 5K5 is 5.5kVA 48V Model (requires: 4 x 12V Solar Batteries)
Inverter Technology Appliances like AC/Fridge can be easily run, Also Water Pump 1.5HP of Crompton or Kirloskar are successfully tested
We recommend user to choose high efficient solar panels from our Solar Panels section to get maximum output.
Please note: installation not included and user need to hire an expert engineer or you can contact UrbanUrja team for arrangements of installation which will be charge extra. All the warranties will be given by EAPRO as per their policies.
Solar Hybrid UPS with inbuilt Real Time Clock for providing the optimum performance of the Solar inverter for Maximum Power Saving.
Pure Sine wave technology using PWM topology with inbuilt Real Time Clock.Smart Solar Selection for maximum utilization of Solar Power.
Provision for setting of critical parameters., like, Time, Boost Battery Voltage, Solar Max charging current, Battery Low Cut voltage etc
Provision for Setting of 4 different Saving Levels according to the User Requirement including, Full Time Charging from the Solar, No Mains Charging etc.
Provision for maintaining the gravity of the battery once in a month.
Intelligent Multicolor LCD display for all system parametersSupports dual mode of working, UPS mode (180V to 260V) and Normal mode(100V to 280V)
Closed Loop Auto Sensing Software Control(ASSC) Smart Battery Charging Technology for longer battery life.
Sine wave output for safety of your sensitive appliances and distortion less operations.
Intelligent overload sensing circuitry with auto retrial facility.


INVERGY
Invergy Hybrid Solar Inverter pcu 3.6kW 48V (support both Lead ACID and Lithium Battery)
Rs. 127,950.00
Rs. 179,950.00
Brand: INVERGY
Features:
Smart Hybrid Inverter (Off-Grid + On-Grid) with in-built True MPPT Controller
Colorful Touch LCD display, IP65 protection degree
6 time periods for battery charging/discharging
Max. charging/discharging current of 90Amp
Frequency drop control, Max 16pcs parallel (can add more pcu in future)
DC Couple and AC Couple retrofit existing solar system
Support storing energy from diesel generator
Compatible with Lithium battery or Lead Acid/Tubular batteries.
Output Load Capacity 3.6kW or Max upto 3.9kW (16AMP AC Load to Max 18Amp)
Integrated Protections: PV Lightning Protection, Anti islanding, PV string input reverse polarity protection, Insulation Resistor Detector, Residual Current Monitoring, Output Over Current Protection, Output Shorted Protection, Over Voltage Protection, Surge Protection
Support Max Panels upto 4650 Watts
Noise (dB): <30 dB
Weight: 20.5
Installation Style: Wall-mounted
5-Years manufacturer warranty, almost 95% issues will be resolved using remote access support.
Contents: 1x INVERGY INV EU 3.6kW with remote monitoring module


INVERGY
Invergy Hybrid Solar Inverter pcu 3kW 24V (support Lithium Battery)
Rs. 107,950.00
Rs. 149,950.00
Brand: INVERGY
Features:
Smart Hybrid Inverter (Off-Grid + On-Grid) with in-built True MPPT Controller
Colorful Touch LCD display, IP65 protection degree
6 time periods for battery charging/discharging
Max. charging/discharging current of 140Amp
Frequency drop control, Max 16pcs parallel (can add more pcu in future)
DC Couple and AC Couple retrofit existing solar system
Support storing energy from diesel generator
Compatible with Lithium battery or Lead Acid/Tubular batteries.
Output Load Capacity 3kW or Max upto 3.3kW (13.6AMP AC Load to Max 15Amp)
Integrated Protections: PV Lightning Protection, Anti islanding, PV string input reverse polarity protection, Insulation Resistor Detector, Residual Current Monitoring, Output Over Current Protection, Output Shorted Protection, Over Voltage Protection, Surge Protection
Support Max Panels upto 3900 Watts
Noise (dB): <30 dB
Weight: 20.5
Installation Style: Wall-mounted
5-Years manufacturer warranty, almost 95% issues will be resolved using remote access support.
Contents: 1x INVERGY INV EU 3kW 24V with remote monitoring module


INVERGY
Invergy Hybrid Solar Inverter pcu 3kW 48V (support Lithium Battery)
Rs. 122,950.00
Rs. 177,950.00
Brand: INVERGY
Features:
Smart Hybrid Inverter (Off-Grid + On-Grid) with in-built True MPPT Controller
Colorful Touch LCD display, IP65 protection degree
6 time periods for battery charging/discharging
Max. charging/discharging current of 70Amp
Frequency drop control, Max 16pcs parallel (can add more pcu in future)
DC Couple and AC Couple retrofit existing solar system
Support storing energy from diesel generator
Compatible with Lithium battery or Lead Acid/Tubular batteries.
Output Load Capacity 3kW or Max upto 3.3kW (13.6AMP AC Load to Max 15Amp)
Integrated Protections: PV Lightning Protection, Anti islanding, PV string input reverse polarity protection, Insulation Resistor Detector, Residual Current Monitoring, Output Over Current Protection, Output Shorted Protection, Over Voltage Protection, Surge Protection
Support Max Panels upto 3900 Watts
Noise (dB): <30 dB
Weight: 20.5
Installation Style: Wall-mounted
5-Years manufacturer warranty, almost 95% issues will be resolved using remote access support.
Contents: 1x INVERGY INV EU 3kW with remote monitoring module


INVERGY
Invergy Hybrid Solar Inverter pcu 5kW 48V (support both Lead ACID and Lithium Battery)
Rs. 135,950.00
Rs. 199,950.00
Brand: INVERGY
Features:
Smart Hybrid Inverter (Off-Grid + On-Grid) with in-built True MPPT Controller
Colorful Touch LCD display, IP65 protection degree
6 time periods for battery charging/discharging
Max. charging/discharging current of 120Amp
Frequency drop control, Max 16pcs parallel (can add more pcu in future)
DC Couple and AC Couple retrofit existing solar system
Support storing energy from diesel generator
Compatible with Lithium battery or Lead Acid/Tubular batteries.
Output Load Capacity 5kW or Max upto 5.5kW (22.7AMP AC Load to Max 25Amp)
Integrated Protections: PV Lightning Protection, Anti islanding, PV string input reverse polarity protection, Insulation Resistor Detector, Residual Current Monitoring, Output Over Current Protection, Output Shorted Protection, Over Voltage Protection, Surge Protection
Support Max Panels upto 6500 Watts
Noise (dB): <30 dB
Weight: 20.5
Installation Style: Wall-mounted
5-Years manufacturer warranty, almost 95% issues will be resolved using remote access support.
Contents: 1x INVERGY INV EU 5kW with remote monitoring module


INVERGY
INVERGY Hybrid Solar Inverter pcu 6kW 48V (support Lithium Battery)
Rs. 145,950.00
Rs. 229,950.00
Brand: INVERGY
Features:
Smart Hybrid Inverter (Off-Grid + On-Grid) with in-built True MPPT Controller
Colorful Touch LCD display, IP65 protection degree
6 time periods for battery charging/discharging
Max. charging/discharging current of 135Amp
Frequency drop control, Max 16pcs parallel (can add more pcu in future)
DC Couple and AC Couple retrofit existing solar system
Support storing energy from diesel generator
Compatible with Lithium battery or Lead Acid/Tubular batteries.
Output Load Capacity 6kW or Max upto 6.6kW (21.3AMP AC Load to Max 30Amp)
Integrated Protections: PV Lightning Protection, Anti islanding, PV string input reverse polarity protection, Insulation Resistor Detector, Residual Current Monitoring, Output Over Current Protection, Output Shorted Protection, Over Voltage Protection, Surge Protection
Support Max Panels upto 7800 Watts
Noise (dB): <30 dB
Weight: 20.5
Installation Style: Wall-mounted
5-Years manufacturer warranty, almost 95% issues will be resolved using remote access support.
Contents: 1x INVERGY INV EU 6kW with remote monitoring module (single phase)


Luminous
Luminous Complete Solar Power System; NXT+ 7.5 kVA 96V MPPT Inverter PCU; 445 Watts Mono Half-Cut Panels x14; 150Ah Battery x8
Rs. 427,550.00
Rs. 699,950.00
Brand: Luminous
Rated AC power - 230V, 26A, Single phase
Max Supported Panel Power - 6000 Wp, Input Voltage Range (Vmp) - 120-210V
Charge Controller - MPPT, Input Voltage 160-240 Voc
Nominal Battery Bank Voltage - 96V
Intelligent system with 32 bit DSP Controller which enables it to handle multiple algorithms efficiently
Inbuilt MPPT charge controller extracts upto 30% more power from Panels
Inbuilt isolation transformer to protect from grid surges and noise
Selectable source priority: Choose source priority from solar, battery and grid
User friendly Informative LCD Display for time charging, Supply etc
Dual MCB protection against short circuit protection for AC and DC
Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery over-charge and battery deep-discharge.
Pure sine wave output for safety and noiseless operation of connected appliances.
Compliance to most of the National & International standards for safety and efficiency and reliability, such as IEC - 61683, IEC - 60068 - 1,2,14,30, IEC - 60529
Product Description:NXT+ range of PCUs is the ideal solution for off-grid applications. Designed to offer control, the PCU intelligently optimizes battery charging and power to load among Solar, Battery and Grid power.
MPPT Charge ControllerOur solar PCU has latest MPPT‚ (Maximum Power Point Tracking) charge controller. It enables you to extract maximum from solar power. It is 30% more efficient than a normal PWM based PCUs.
Priority SettingBeing a bi - directional PCU it allows customers flexibility to set the priority setting based on their requirement of maximum energy saving, power backup only during power cut and power backup through battery in areas where grid supply is not available.
Super Informative User friendly LCDA user friendly LCD that displays important information like battery time of charge & discharge, Grid Off / available, Priority setting etc.
Safe for your homeLuminous Solar PCU is armed with comprehensive protection features such as short-circuit, reverse polarity, battery over-charge and battery deep-discharge. Its pure sine wave output ensures safety and noiseless operation of connected appliances.
MNRE & IEC complianceSolar PCU complies with all the National & International standards for safety and efficiency and reliability, such as IEC - 61683, IEC - 60068 - 1,2,14,30, IEC - 60529
Features:
Material: Metal, Color: Multicolor
MPPT charge controller to extract upto 30% more power from Panels
Inbuilt isolation transformer to protect from grid surges and noise
Charging from both mains and solar
Selectable source priority: Choose source priority from solar, battery and grid
Compliance to IEC standards for safety, reliability and quality
Technical Specifications:
Model
NXT+ 7.5 kVA
Range Name (Solar)
PCU
VA Rating
7.5 kVA
Output Waveform
Sine Wave
Warranty
24 months
Net weight (kg.)
76.3 kg
No. of 12V Batteries in Series
8
Dimensions (L*B*H)
35.0*63.5*58.9 CM
Technology (Solar)
With Battery
Maximum Power Voltage Vmp (V)
120V-210V
Max. supported panel power (Wp)
6000 Wp
Nominal battery bank voltage
96 V
Input Voltage Range (Voc)
160V-240V
Manufactured By
Luminous Power Technologies Pvt. Ltd
Contents of Pack
1 N Inverter, 1 N Manual
In-Built Solar Charge Controller
MPPT
Contents: 1x Luminous NXT 7.5 kVA


Luminous
Luminous Hybrid Solar PCU TX 3.75 kVA 48V Mppt Off-Grid cum On-Grid Inverter (with Remote Monitoring Device)
Rs. 53,650.00
Rs. 820,000.00
Luminous Hybrid Inverter range is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid. It is available in 3.75VA
Features:
Rated AC power - 230V (single phase)
Max Supported Panel Power - 3000 Wp, Input Voltage Range (Vmp) – 65V-130V
Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V
Nominal Battery Bank Voltage - 48V (4 x 12V Batteries)
BIS certified solar inverter
In-built TDR for loads with heavy in-rush current
Inbuilt MPPT charge controller to maximize solar generation from solar panels
Inbuilt isolation transformer to protect from grid surges and noise
User selectable source priority: Choose source priority from solar, battery and grid
User friendly Informative LCD Display
MCB protection against short circuit protection
Pure sine wave output for better performance & safety of connected loads
Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization
Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency.
User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters.
Guaranteed Safety: Comprehensive protection features include short circuit, reverse polarity, surge protection etc.
BIS Certified: BIS certified as per IS/IEC standards
Specifications:
Model Name
HYBRID TX 3.7kVA
Capacity (kW)
3kW
Nominal Battery Voltage (Vdc)
48V (4x 12V Batteries)
Output Waveform
Sinewave
SOLAR PHOTOVOLTAIC INPUT
Type of Charger
MPPT
Maximum PV Power (kW)
3000W
Solar Input Voltage (Voc)
65V-165V
Solar Input Voltage Range (Vmp)
65V-130V
Max. PV Input Current (Imp)
46A
Max. MPPT Output Current (A)
60A
Max. Conversion Efficiency
93%
No. of MPPT Channels
1
GRID INPUT
Input Supply Phases
Single Phase
Input Voltage Mains mode (Regulated UPS Mode)
180-260Vac
Nominal Grid Current (Import)
21A
GRID OUTPUT
Grid Current (Export)
12A ± 2A
BATTERY
No. of Batteries
4 (12X4 = 48v)
Charging Stages
Boost, Absorption, Float
INVERTER
Switching Element
MOSFET
Control
32 Bit DSP Controlled
Nominal Output Voltage (V) & Voltage Range
230V ± 2%
Output Supply Phase
Single Phase ( 1 Phase 2 Wire)
Nominal Output Frequency
50 Hz
Nominal Output Current
13A
Output Voltage Distortion (THD)
<= 4%
Power Factor
0.9 lag to 0.9 lead
Overload at Nominal output voltage
110% for 10mins, 125% for 1mins, 200% for 5 seconds
SYSTEM DATA
Transfer Time
,20 mS
Protection
Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surgeprotection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection
Display Parameters
"Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time "
Indications
Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, Systemon Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator(For Overload, Low Battery, Over Temperature)
Settings
"Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings"
ENVIRONMENT
IP Protection Level
IP-21
Operating Temperature
0-45 °C
Storage Temperature
0-45 °C
Cooling
Forced Air Cooling
Max. Relative Humidity @ 25 °C
Up to 95% (non-condensing)
INTERFACE
DC Connection
MC4 Connectors
Datalogger & Communication
4 pins RS485 connector
GENERAL
Display / Indications
LCD Display (20*4) / LED Indications
Mounting
Surface Mount
Galvanic Isolation
Inbuilt Isolation Transformer
Dimensions (WxDxH in mm)
300x504x515mm
Net Weight
50kG
Contents:
1 x Luminous Hybrid TX 3.75kVA (MPPT Solar PCU)
1 x Luminous Remote Data Monitoring Device (Monitoring via Luminous Connect App)


Luminous
Luminous Hybrid Solar PCU TX 5kVA 48V Mppt Off-Grid cum On-Grid Inverter
Rs. 69,950.00
Rs. 99,500.00
Luminous Hybrid Inverter range is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid. It is available in 5VA
Features:
Rated AC power - 230V (single phase)
Max Supported Panel Power - 4000 Wp, Input Voltage Range (Vmp) – 65V-130V
Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V
Nominal Battery Bank Voltage - 48V (4 x 12V Batteries)
BIS certified solar inverter
In-built TDR for loads with heavy in-rush current
Inbuilt MPPT charge controller to maximize solar generation from solar panels
Inbuilt isolation transformer to protect from grid surges and noise
User selectable source priority: Choose source priority from solar, battery and grid
User friendly Informative LCD Display
MCB protection against short circuit protection
Pure sine wave output for better performance & safety of connected loads
Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization
Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency.
User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters.
Guaranteed Safety: Comprehensive protection features include short circuit, reverse polarity, surge protection etc.
BIS Certified: BIS certified as per IS/IEC standards
Specifications:
Model Name
HYBRID TX 5kVA
Capacity (kW)
4kW
Nominal Battery Voltage (Vdc)
48V (4x 12V Batteries)
Output Waveform
Sinewave
SOLAR PHOTOVOLTAIC INPUT
Type of Charger
MPPT
Maximum PV Power (kW)
4000W
Solar Input Voltage (Voc)
65V-165V
Solar Input Voltage Range (Vmp)
65V-130V
Max. PV Input Current (Imp)
61A
Max. MPPT Output Current (A)
80A
Max. Conversion Efficiency
93%
No. of MPPT Channels
1
GRID INPUT
Input Supply Phases
Single Phase
Input Voltage Mains mode (Regulated UPS Mode)
180-270Vac
Nominal Grid Current (Import)
29A
GRID OUTPUT
Grid Current (Export)
16A ± 2A
BATTERY
No. of Batteries
4 (12X4 = 48v)
Charging Stages
Boost, Absorption, Float
INVERTER
Switching Element
MOSFET
Control
32 Bit DSP Controlled
Nominal Output Voltage (V) & Voltage Range
230V ± 2%
Output Supply Phase
Single Phase ( 1 Phase 2 Wire)
Nominal Output Frequency
50 Hz
Nominal Output Current
17A
Output Voltage Distortion (THD)
<= 4%
Power Factor
0.9 lag to 0.9 lead
Overload at Nominal output voltage
110% for 10mins, 125% for 1mins, 200% for 5 seconds
SYSTEM DATA
Transfer Time
,20 mS
Protection
Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surgeprotection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection
Display Parameters
"Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time "
Indications
Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, Systemon Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator(For Overload, Low Battery, Over Temperature)
Settings
"Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings"
ENVIRONMENT
IP Protection Level
IP-21
Operating Temperature
0-45 °C
Storage Temperature
0-45 °C
Cooling
Forced Air Cooling
Max. Relative Humidity @ 25 °C
Up to 95% (non-condensing)
INTERFACE
DC Connection
MC4 Connectors
Datalogger & Communication
4 pins RS485 connector
GENERAL
Display / Indications
LCD Display (20*4) / LED Indications
Mounting
Surface Mount
Galvanic Isolation
Inbuilt Isolation Transformer
Dimensions (WxDxH in mm)
350x635x589mm
Net Weight
64kG
Contents:
1 x Luminous Hybrid TX 5kVA (MPPT Solar PCU)


Luminous
Luminous Hybrid Solar PCU TX 5kVA 48V Mppt Off-Grid cum On-Grid Inverter (with Remote Monitoring Device)
Rs. 73,950.00
Rs. 99,500.00
Luminous Hybrid Inverter range is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid. It is available in 5VA
Features:
Rated AC power - 230V (single phase)
Max Supported Panel Power - 4000 Wp, Input Voltage Range (Vmp) – 65V-130V
Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V
Nominal Battery Bank Voltage - 48V (4 x 12V Batteries)
BIS certified solar inverter
In-built TDR for loads with heavy in-rush current
Inbuilt MPPT charge controller to maximize solar generation from solar panels
Inbuilt isolation transformer to protect from grid surges and noise
User selectable source priority: Choose source priority from solar, battery and grid
User friendly Informative LCD Display
MCB protection against short circuit protection
Pure sine wave output for better performance & safety of connected loads
Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization
Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency.
User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters.
Guaranteed Safety: Comprehensive protection features include short circuit, reverse polarity, surge protection etc.
BIS Certified: BIS certified as per IS/IEC standards
Specifications:
Model Name
HYBRID TX 5kVA
Capacity (kW)
4kW
Nominal Battery Voltage (Vdc)
48V (4x 12V Batteries)
Output Waveform
Sinewave
SOLAR PHOTOVOLTAIC INPUT
Type of Charger
MPPT
Maximum PV Power (kW)
4000W
Solar Input Voltage (Voc)
65V-165V
Solar Input Voltage Range (Vmp)
65V-130V
Max. PV Input Current (Imp)
61A
Max. MPPT Output Current (A)
80A
Max. Conversion Efficiency
93%
No. of MPPT Channels
1
GRID INPUT
Input Supply Phases
Single Phase
Input Voltage Mains mode (Regulated UPS Mode)
180-270Vac
Nominal Grid Current (Import)
29A
GRID OUTPUT
Grid Current (Export)
16A ± 2A
BATTERY
No. of Batteries
4 (12X4 = 48v)
Charging Stages
Boost, Absorption, Float
INVERTER
Switching Element
MOSFET
Control
32 Bit DSP Controlled
Nominal Output Voltage (V) & Voltage Range
230V ± 2%
Output Supply Phase
Single Phase ( 1 Phase 2 Wire)
Nominal Output Frequency
50 Hz
Nominal Output Current
17A
Output Voltage Distortion (THD)
<= 4%
Power Factor
0.9 lag to 0.9 lead
Overload at Nominal output voltage
110% for 10mins, 125% for 1mins, 200% for 5 seconds
SYSTEM DATA
Transfer Time
,20 mS
Protection
Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surgeprotection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection
Display Parameters
"Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time "
Indications
Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, Systemon Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator(For Overload, Low Battery, Over Temperature)
Settings
"Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings"
ENVIRONMENT
IP Protection Level
IP-21
Operating Temperature
0-45 °C
Storage Temperature
0-45 °C
Cooling
Forced Air Cooling
Max. Relative Humidity @ 25 °C
Up to 95% (non-condensing)
INTERFACE
DC Connection
MC4 Connectors
Datalogger & Communication
4 pins RS485 connector
GENERAL
Display / Indications
LCD Display (20*4) / LED Indications
Mounting
Surface Mount
Galvanic Isolation
Inbuilt Isolation Transformer
Dimensions (WxDxH in mm)
350x635x589mm
Net Weight
64kG
Contents:
1 x Luminous Hybrid TX 5kVA (MPPT Solar PCU)
1 x Luminous Remote Data Monitoring Device (Monitoring via Luminous Connect App)


Luminous
Luminous Hybrid Solar System; TX 3.75 kVA 48V Mppt Inverter PCU; 445 Watts Mono Perc Panels x2; 80Ah Battery x4; with Remote Monitoring Device
Rs. 120,950.00
Rs. 175,950.00
Luminous Hybrid Inverter Combo is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid.
Solar Power Generation Combo includes:
Quantity
Warranty
Hybrid Solar PCU TX 3.75VA (with Wifi remote monitoring dongle)
1
2 Years
80Ah c10 Solar Tall Tubular Batteries
4
60* Months
445Watts mono perc half-cut solar panels
4
12/25 Years
Hybrid PCU Features:
Rated AC power - 230V (single phase)
Max Supported Panel Power - 3000 Wp, Input Voltage Range (Vmp) – 65V-130V
Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V
Nominal Battery Bank Voltage - 48V (4 x 12V Batteries)
BIS certified solar inverter
In-built TDR for loads with heavy in-rush current
Inbuilt MPPT charge controller to maximize solar generation from solar panels
Inbuilt isolation transformer to protect from grid surges and noise
User selectable source priority: Choose source priority from solar, battery and grid
User friendly Informative LCD Display
MCB protection against short circuit protection
Pure sine wave output for better performance & safety of connected loads
Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization
Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency.
User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters.
Guaranteed Safety: Comprehensive protection features include short circuit, reverse polarity, surge protection etc.
BIS Certified: BIS certified as per IS/IEC standards
Specifications:
Model Name
HYBRID TX 3.7kVA
Capacity (kW)
3kW
Nominal Battery Voltage (Vdc)
48V (4x 12V Batteries)
Output Waveform
Sinewave
SOLAR PHOTOVOLTAIC INPUT
Type of Charger
MPPT
Maximum PV Power (kW)
3000W
Solar Input Voltage (Voc)
65V-165V
Solar Input Voltage Range (Vmp)
65V-130V
Max. PV Input Current (Imp)
46A
Max. MPPT Output Current (A)
60A
Max. Conversion Efficiency
93%
No. of MPPT Channels
1
GRID INPUT
Input Supply Phases
Single Phase
Input Voltage Mains mode (Regulated UPS Mode)
180-260Vac
Nominal Grid Current (Import)
21A
GRID OUTPUT
Grid Current (Export)
12A ± 2A
BATTERY
No. of Batteries
4 (12X4 = 48v)
Charging Stages
Boost, Absorption, Float
INVERTER
Switching Element
MOSFET
Control
32 Bit DSP Controlled
Nominal Output Voltage (V) & Voltage Range
230V ± 2%
Output Supply Phase
Single Phase ( 1 Phase 2 Wire)
Nominal Output Frequency
50 Hz
Nominal Output Current
13A
Output Voltage Distortion (THD)
<= 4%
Power Factor
0.9 lag to 0.9 lead
Overload at Nominal output voltage
110% for 10mins, 125% for 1mins, 200% for 5 seconds
SYSTEM DATA
Transfer Time
,20 mS
Protection
Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surgeprotection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection
Display Parameters
"Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time "
Indications
Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, Systemon Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator(For Overload, Low Battery, Over Temperature)
Settings
"Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings"
ENVIRONMENT
IP Protection Level
IP-21
Operating Temperature
0-45 °C
Storage Temperature
0-45 °C
Cooling
Forced Air Cooling
Max. Relative Humidity @ 25 °C
Up to 95% (non-condensing)
INTERFACE
DC Connection
MC4 Connectors
Datalogger & Communication
4 pins RS485 connector
GENERAL
Display / Indications
LCD Display (20*4) / LED Indications
Mounting
Surface Mount
Galvanic Isolation
Inbuilt Isolation Transformer
Dimensions (WxDxH in mm)
300x504x515mm
Net Weight
50kG
Half-Cut Solar Panel Features:
SPECIAL CELL DESIGN: The unique cell design leads to reduced electrodes resistance and smaller current, thus enables higher fill factor. Meanwhile, it can reduce losses of mismatch and cell wear, and increase total reflection.
IP68 RATED JUNCTION BOX: IP68 rated junction box ensures an outstanding waterproof level, supports on the cables. Anti-reflective coating and back surface (BSF) for more light absorption. Advanced EVA (ethyl vinyl acetate) encapsulation to give better protection to modules
High Power Output: Compared to 158.75mm module, the power output can increase 25W-30W
High PID resistant: PID resistance Technology (Potential-Induced Degradation) for safety against substantial power loss due to stray currents triggered by certain climate conditions
Excellent weak light performance: Excellent Low light performance in low visibility in clouds, evening, and morning.
Lower Operating Temperature: Lower operating temperature and temperature coefficient increases the power output.
Extended load tests: Best in Class conversion efficiency
Withstanding Harsh Environment: High strength light-weight aluminium frame design for high torsion resistance against winds and snow loads
TECHNICAL SPECIFICATIONS
ELECTRICAL CHARACTERISTICS OF SPV MODULES
Maximum Power at STC (Pmax)
445Wp/24V (-0 to +3%)
Open circuit Voltage (Voc)
48.9V
Voltage at maximum power (Vmp)
40.9V
Short Circuit current (Isc)
11.32A
Current at maximum power (Imp)
10.7A
Maximum Module Efficiency (%)
20.7%
Operating Temperature
-40°C to +85°C
Maximum System Voltage
1500VDC
Maximum Series Fuse Rating
20Amp
Solar Cell
Mono Perc silicon 166 mm
No. of Cells
144 (6 x 24)
Dimensions
209.4*103.9*3.5 CM
Weight
23.5 kgs
Front Glass
3.2 mm tempered glass
Frame
Anodized aluminum alloy
Junction Box
IP68 rated (3 bypass diodes)
Output Cables
4.0 mm2
Connectors
MC4 EV02, Cable 01S
BIS certified as per IS/IEC standards which is mandatory for all solar panels.
Battery Features:
Tall Tubular plate battery 60 Months warranty Rated Capacity @ C10: 80Ah
Factory charged battery in ready to use condition Water level indicators for easy maintenance.
Tubular plate construction for long life and superior performance.
Highly puncture-resistant polyethylene separator for higher reliability.
Warranty 80Ah C10 Battery: 60* Months
Contents:
Luminous Hybrid TX 3.7kVA PCU + Remote Monitoring Device x1
Luminous 445 Watts Mono PERC half-cut panels x4
Luminous LPTT1280H 80Ah 12 Volt Solar Tall Tubular Battery x4


Luminous
Luminous Hybrid Solar System; TX 3.75 kVA 48V Mppt Inverter PCU; 445 Watts Mono Perc Panels x4; 150Ah Battery x4; with Remote Monitoring Device
Rs. 169,950.00
Rs. 235,950.00
Luminous Hybrid Inverter Combo is a combination of an on-grid inverter and off-grid inverter making it more versatile than other solar inverters helping in lowering your electricity bills and protecting from power outages. It can supply solar power to run your electrical appliances, store electricity in batteries required during power outages as well as export excess power generated to grid.
Solar Power Generation Combo includes:
Quantity
Warranty
Hybrid Solar PCU TX 3.75VA (with Wifi remote monitoring dongle)
1
2 Years
150Ah c10 Solar Tall Tubular Batteries
4
60* Months
445Watts mono perc half-cut solar panels
4
12/25 Years
Hybrid PCU Features:
Rated AC power - 230V (single phase)
Max Supported Panel Power - 3000 Wp, Input Voltage Range (Vmp) – 65V-130V
Charge Controller - MPPT, Input Voltage Range (Voc)- 65V-165V
Nominal Battery Bank Voltage - 48V (4 x 12V Batteries)
BIS certified solar inverter
In-built TDR for loads with heavy in-rush current
Inbuilt MPPT charge controller to maximize solar generation from solar panels
Inbuilt isolation transformer to protect from grid surges and noise
User selectable source priority: Choose source priority from solar, battery and grid
User friendly Informative LCD Display
MCB protection against short circuit protection
Pure sine wave output for better performance & safety of connected loads
Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Smart Solar Optimization: Gives priority to solar in both backup and charging mode of operation thereby maximizing solar energy utilization
Maximum Power Point Tracking: MPPTs to extract up to 30% more power from the panels, minimizing impact of shading and increasing efficiency.
User Friendly LCD Display: Makes it convenient for user to easily monitor various performance parameters.
Guaranteed Safety: Comprehensive protection features include short circuit, reverse polarity, surge protection etc.
BIS Certified: BIS certified as per IS/IEC standards
Specifications:
Model Name
HYBRID TX 3.7kVA
Capacity (kW)
3kW
Nominal Battery Voltage (Vdc)
48V (4x 12V Batteries)
Output Waveform
Sinewave
SOLAR PHOTOVOLTAIC INPUT
Type of Charger
MPPT
Maximum PV Power (kW)
3000W
Solar Input Voltage (Voc)
65V-165V
Solar Input Voltage Range (Vmp)
65V-130V
Max. PV Input Current (Imp)
46A
Max. MPPT Output Current (A)
60A
Max. Conversion Efficiency
93%
No. of MPPT Channels
1
GRID INPUT
Input Supply Phases
Single Phase
Input Voltage Mains mode (Regulated UPS Mode)
180-260Vac
Nominal Grid Current (Import)
21A
GRID OUTPUT
Grid Current (Export)
12A ± 2A
BATTERY
No. of Batteries
4 (12X4 = 48v)
Charging Stages
Boost, Absorption, Float
INVERTER
Switching Element
MOSFET
Control
32 Bit DSP Controlled
Nominal Output Voltage (V) & Voltage Range
230V ± 2%
Output Supply Phase
Single Phase ( 1 Phase 2 Wire)
Nominal Output Frequency
50 Hz
Nominal Output Current
13A
Output Voltage Distortion (THD)
<= 4%
Power Factor
0.9 lag to 0.9 lead
Overload at Nominal output voltage
110% for 10mins, 125% for 1mins, 200% for 5 seconds
SYSTEM DATA
Transfer Time
,20 mS
Protection
Under/Over voltage protection for Input/Output, Battery & Array; Reverse polarity protection for Array& Battery; Protection for Output Overload, Short circuit and Over Temperature; MCB & Surgeprotection at Grid/DG Input, Battery, Wrong Wiring, Low Battery, Anti-Islanding Protection
Display Parameters
"Voltage/Current: Array, Battery, Grid, Output; Display Parameters Day kWh, Cumulative kWh, Date, Time "
Indications
Battery Charging/ Discharging, Grid Available, Grid Select, Solar Available, Inverter On, Load On, Systemon Battery, Low Battery Pre-alarm, Wrong Wiring, Short Circuit Trip, Fault LED Indicator(For Overload, Low Battery, Over Temperature)
Settings
"Battery type, Battery voltage (Boost, Float, Absorption), Priority (SGB/SBG/Solar Only/Grid Feed),Charging Current from Grid, Zero feed/Allow feed in GFM Current Settings"
ENVIRONMENT
IP Protection Level
IP-21
Operating Temperature
0-45 °C
Storage Temperature
0-45 °C
Cooling
Forced Air Cooling
Max. Relative Humidity @ 25 °C
Up to 95% (non-condensing)
INTERFACE
DC Connection
MC4 Connectors
Datalogger & Communication
4 pins RS485 connector
GENERAL
Display / Indications
LCD Display (20*4) / LED Indications
Mounting
Surface Mount
Galvanic Isolation
Inbuilt Isolation Transformer
Dimensions (WxDxH in mm)
300x504x515mm
Net Weight
50kG
Half-Cut Solar Panel Features:
SPECIAL CELL DESIGN: The unique cell design leads to reduced electrodes resistance and smaller current, thus enables higher fill factor. Meanwhile, it can reduce losses of mismatch and cell wear, and increase total reflection.
IP68 RATED JUNCTION BOX: IP68 rated junction box ensures an outstanding waterproof level, supports on the cables. Anti-reflective coating and back surface (BSF) for more light absorption. Advanced EVA (ethyl vinyl acetate) encapsulation to give better protection to modules
High Power Output: Compared to 158.75mm module, the power output can increase 25W-30W
High PID resistant: PID resistance Technology (Potential-Induced Degradation) for safety against substantial power loss due to stray currents triggered by certain climate conditions
Excellent weak light performance: Excellent Low light performance in low visibility in clouds, evening, and morning.
Lower Operating Temperature: Lower operating temperature and temperature coefficient increases the power output.
Extended load tests: Best in Class conversion efficiency
Withstanding Harsh Environment: High strength light-weight aluminium frame design for high torsion resistance against winds and snow loads
TECHNICAL SPECIFICATIONS
ELECTRICAL CHARACTERISTICS OF SPV MODULES
Maximum Power at STC (Pmax)
445Wp/24V (-0 to +3%)
Open circuit Voltage (Voc)
48.9V
Voltage at maximum power (Vmp)
40.9V
Short Circuit current (Isc)
11.32A
Current at maximum power (Imp)
10.7A
Maximum Module Efficiency (%)
20.7%
Operating Temperature
-40°C to +85°C
Maximum System Voltage
1500VDC
Maximum Series Fuse Rating
20Amp
Solar Cell
Mono Perc silicon 166 mm
No. of Cells
144 (6 x 24)
Dimensions
209.4*103.9*3.5 CM
Weight
23.5 kgs
Front Glass
3.2 mm tempered glass
Frame
Anodized aluminum alloy
Junction Box
IP68 rated (3 bypass diodes)
Output Cables
4.0 mm2
Connectors
MC4 EV02, Cable 01S
BIS certified as per IS/IEC standards which is mandatory for all solar panels.
Battery Features:
Tall Tubular plate battery 60 Months warranty Rated Capacity @ C10: 150Ah
Factory charged battery in ready to use condition Water level indicators for easy maintenance.
Tubular plate construction for long life and superior performance.
Highly puncture-resistant polyethylene separator for higher reliability.
Warranty 150Ah C10 Battery: 60* Months
Contents:
Luminous Hybrid TX 3.7kVA PCU + Remote Monitoring Device x1
Luminous 445 Watts Mono PERC half-cut panels x 4
Luminous LPTT12150L 150Ah 12 Volt Solar Tall Tubular Battery x 4